Chamberlain, Liftmaster,
Sentex, Stanley Gate products
|
Sentex
HL410-11 Liftmaster/ Chamberlain / Hydraulic Automatic Gate Openers
Replacement. (Sentex & Stanley)
Always buy Hydraulic
automatic gate openers for powerful and dependable operation in a residential or light commercial
application. The HL 410-11 will replace your HL410-11 Sentex electric
opener without modification. The HL410-11 may also be adapted to other
Sentex automatic gate openers.
Sentex Systems Automatic Gate
Openers and Lifting Gate Opener Hinges are our specialty. We manufacture a complete line for use with our hydraulic single
and dual
automatic swing gates and works well with any Aluminum fence gate. We
also offer a complete line of Garage Door opener, automatic gate
openers,
swing electric gate openers, inground gate operators, hydraulic
gate
openers, and slide gate openers for commercial and residential use.
|
Brochures
Manual
|
Opener
Safety Guidelines
|
|
The
HL410-11 is compact enough to fit on most gates and can be used on those gates
that lack the space to place a traditional gate operator. Its small size
and sleek design allow it to blend into any landscape environment. If a
longer stroke more powerful stroke is needed the HL410-290, 390, 440 models
are the choice for very large gates.
The
Upswung HL410-11 is an exact replacement for your customer's
Sentex HL 410-11
SPECIFICATIONS
Dimensions:
HL 410 = 3 1/2 H x 3 1/2 D x 31 3/4" L open and 22" L retracted
Warranty:
One Year
POWER
RANGE OPTIONS
HL410-11
= 1/4 Hp, 115 Volts @ 60Hz
A
quality gate operator installation must consist of the right product for the
right project. At Sentex we recognize these needs and provide you an
quality choice of operators to meet these requirements.
Our
Swing Gate Operators range from light to heavy-duty depending on the size of
the entrance and quantity of open/close cycles. All the features and
benefits are identical so selecting the operator is simple. An automated
vehicular gate system includes several components, all of which must be
selected in concert with each other and with the requirements of the job.
The following design guide can be used to isolate which operator is best for
your application. Keep in mind that increasing the motor size; either up or
down, can alter the gate speed.
Usage
Max. Cycles/Hour
Model # Family
Duty
7-10
HL410-11
0-10
Foot
Gate
500lb Max.
8-11 Foot
Gate
300lb Max.
The
HL410-220 operators are typically used for the residential or small
commercial buildings and the HL410-220 is engineered with actuator
technology.
|
| Sentex
F4 PLUS/
115V The Upswung F4 PLUS electronic control
unit is for use with the HL410-220 single or double swing gates . It offers a complete operating range
(Multi-User, Step-by-Step, Step-by-Step with Automatic Re-closing,
Pedestrian Gate) and adjustment functions (Run Time, Pause Time, Phase
Shift Delay for two gates, Motor Power, Power Booster for initial
startup). It is versatile because of its options (4 limit switches, pre-flashing,
flashing light controlled by control unit, courtesy light, cut-out of unused inputs with dip switches, built-in or plug-in
radio module). Easy to install thanks to the control LEDs, extractable terminal
strips, and the silk-screen printing on the printed circuit indicating connections and functions.
Liftmaster, Stanley, Chamberlain Gate operator installations should
be completed by a qualified installer only.
|
Brochures
Manual |
|
HL410-21 / 230V
Sold Out
|
|
Chamberlain, Liftmaster, Stanley, Replacement
Parts for Liftmaster, Stanley, Sentex Gate Products.
|
|
