|
The
HL410-21 / 230V
is compact enough to fit on most gates and can be used on those gates
that lack the space to place a traditional gate operator. Its small size
and sleek design allow it to blend into any landscape environment. If a
longer stroke more powerful stroke is needed the HL410-290, 390, 440 models
are the choice for very large gates.
The
Upswung HL410-21 /230V is an exact replacement for your customer's
Sentex HL
410-21
SPECIFICATIONS
Dimensions:
HL 410-220/230V = 3 1/2 H x 3 1/2 D x 31 3/4" L open and 22" L retracted
Warranty:
One Year
POWER
RANGE OPTIONS
HL410-22/230V = 1/4 Hp,
230 Volts @ 60Hz
A quality gate
operator installation must consist of the right product for the right
project. At UPSWUNG we recognize these needs and provide you an quality choice of operators to meet these requirements.
Our Swing Gate
Operators range from light to heavy-duty depending on the size of the
entrance and quantity of open/close cycles. All the features and benefits
are identical so selecting the operator is simple. An automated vehicular
gate system includes several components, all of which must be selected in
concert with each other and with the requirements of the job. The following
design guide can be used to isolate which operator is best for your
application. Keep in mind that increasing the motor size; either up or down,
can alter the gate speed.
Usage
Max. Cycles/Hour
Model # Family
Duty
15
HL410-21/230V
0-12 Foot
Gate
900lbs Max.
The HL410-21
operators are typically used for the
residential or small commercial buildings and the HL410-21 is engineered with actuator
technology.
| Sentex
F4 PLUS/ 230V
The Sentex F4 PLUS electronic control
unit is for use with the HL410-220 single or double swing gates . It offers a complete operating range
(Multi-User, Step-by-Step, Step-by-Step with Automatic Re-closing,
Pedestrian Gate) and adjustment functions (Run Time, Pause Time, Phase
Shift Delay for two gates, Motor Power, Power Booster for initial
startup). It is versatile because of its options (4 limit switches, pre-flashing,
flashing light controlled by control unit, courtesy light, cut-out of unused inputs with dip switches, built-in or plug-in
radio module). Easy to install thanks to the control LEDs, extractable terminal
strips, and the silk-screen printing on the printed circuit indicating connections and functions.
Liftmaster, Stanley, Chamberlain Gate operator installations should be
completed by a qualified installer only.
|
Click here to print
Brochures Installation Manual
|
HL410-21 / 230V $649.00
|
